English- Home
- Stock Categories
- Quality Control
- Original Rexroth AEAA4VSO Series Piston Pump
- Original Rexroth ALA10VO series Piston Pump
- Original Rexroth AZPF series Gear Pump
Home>Products>Linear Bearings>SC30VUU Samick Linear Bearings
SC30VUU Samick Linear Bearings
category
Linear Bearings
Samick SC30VUU SPECIFICATIONS
- Samick
SC30VUU
- 1.6563 in
- 0.5000 in
- 3510 lbf
- Stainless Steel
- 1.3438 in
- 2520 lbf
- 4.2500 in
- 3.2500 in
-
2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
SC30VUU Samick Linear Bearings Details
- 3.6875 in
- 0.5313 in
- 1 1/4 in
Samick SC30VUU Linear Bearings Description
Compare similar Linear Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | d | h | A | D | E | G | H | J |
| SC30VUU | Samick | 30 mm | 30 mm | 15 mm | 39 mm | 10 mm | 49 mm | 59,5 mm | 58 mm |
| Basic static load rating C0 | 3.05 kN |
| db max. | 25.1 mm |
| Basic dynamic load rating C | 5.72 kN |
| da max. | 25.1 mm |
| a | 11.2 mm |
| Fatigue load limit Pu | 0.129 kN |
| Preload class B GB | 70 N |
| Da max. | 35 mm |
| Calculation factor f2A | 1 |
| Preload class C GC | 140 N |
| Calculation factor f1 | 0.98 |
| Calculation factor fHC | 1.04 |
| D2 | 34.15 mm |
| D | 37 mm |
| B | 9 mm |
| Calculation factor f2B | 1.07 |
| Calculation factor (back-to-back, face-to-face) Y1 | 0.92 |
| Calculation factor e | 0.68 |
| Static axial stiffness, preload class A | 56 N/µm |
| Calculation factor (back-to-back, face-to-face) Y2 | 1.41 |
| LMEF8 Samick Linear Bearings | Grease Speed Rating Open/Shielded n1:22000 rpm; Accessories:One Shield & Snap-Ri; d:15.000 mm; Fillet Radius ra:0.30 mm; D:32.0000 mm; Basic Static Radial Load Rating Co:2850 N; B:9.00 mm; Basic Dynamic Radial Load Rating C:5590 N; Oil Speed Rating Open/Shielded n2:28000 rpm; Sealed Speed Rating n3:14000 rpm; |
| SDE40MG KOYO Linear Bearings | Oil:207.560 kN; with cylindrical bore:950 min-1; Pu:1670 kN; Grease:2280 kN; Dynamic (Cr):9 mm; D:360 mm; B:120 mm; d:170 mm; Static (Cor):16.7 mm; rs (min):4 mm; with tapered bore:1 250 min-1; |
| LME16UUOP Samick Linear Bearings | Cap bolt, SAE grade:5; PosiTrac Plus contact element (dc shaft position):B10724-106; Appropriate attachment bolt size G:0.875 in; Cap bolt recommended tightening torque:203.4 N·m; Pa:36 kN; Housing:SAF 220; J min.:295.275 mm; Labyrinth ring (db shaft position):LOR 118; da:100 mm; ba:38.894 mm; h:42.069 mm; N1:25.4 mm; Da:180 mm; Ca:55.804 mm; P150°:46.3 kN; L:387.35 mm; H1:114.3 mm; db:114.3 mm; H2:44.45 mm; J max.:333.375 mm; |
| LMES16OP Samick Linear Bearings | Basic dynamic load rating C:3515 kN; Calculation factor e:0.21; D:600 mm; Da max.:582 mm; Basic static load rating C0:5850 kN; b:22.3 mm; Calculation factor Y2:4.8; d:400 mm; D1 ≈:557 mm; K:12 mm; B:148 mm; r1,2 min.:5 mm; Limiting speed:240 r/min; ra max.:4 mm; Mass bearing:143 kg; Calculation factor Y1:3.2; Calculation factor Y0:3.2; Fatigue load limit Pu:415 kN; d2 ≈:443 mm; |
| LM13UUAJ Samick Linear Bearings | Cap bolt, SAE grade:5; PosiTrac Plus contact element (dc shaft position):B10724-106; Appropriate attachment bolt size G:0.875 in; Cap bolt recommended tightening torque:203.4 N·m; Pa:36 kN; Housing:SAF 220; J min.:295.275 mm; Labyrinth ring (db shaft position):LOR 118; da:100 mm; ba:38.894 mm; h:42.069 mm; N1:25.4 mm; Da:180 mm; Ca:55.804 mm; P150°:46.3 kN; L:387.35 mm; H1:114.3 mm; db:114.3 mm; H2:44.45 mm; J max.:333.375 mm; |
| SBR 16-UU NBS Linear Bearings | Initial grease fill:1672.65 g; PG:1/4 NPT; P120°:107 kN; Stabilizing ring:SR-38-32; J min.:549.275 mm; h:61.913 mm; J1:114.3 mm; A2:273.05 mm; S:4.763 mm; Pa:52.5 kN; H:401.637 mm; Labyrinth ring:2 x LOR 155; da:176.213 mm; End plug (suffix Y):EPR 21; R2:42.069 mm; Da:339.999 mm; N1:34.925 mm; P180°:113 kN; P90°:173 kN; Ca:101.803 mm; |
| LM35OP CX Linear Bearings | Grease Speed Rating n1:11000 rpm; Fillet Radius ra:1.00 mm; D:62.0000 mm; Fillet Radius rb:0.60 mm; Basic Dynamic Radial Load Rating C:21200 N; Basic Static Radial Load Rating Co:13700 N; Oil Speed Rating n2:14000 rpm; d:25.000 mm; B:17.00 mm; |
| SDM10MG KOYO Linear Bearings | Grease Speed Rating Open/Shielded n1:7800 rpm; Basic Static Radial Load Rating Co:22800 N; Basic Dynamic Radial Load Rating C:29700 N; Fillet Radius ra:1.00 mm; D:72.0000 mm; Oil Speed Rating Open/Shielded n2:9500 rpm; B:17.00 mm; d:35.000 mm; Accessories:Snap-Ring; |
| LUCD 12-2LS SKF Linear Bearings | Cap bolt, SAE grade:5; PosiTrac Plus contact element (dc shaft position):B10724-106; Appropriate attachment bolt size G:0.875 in; Cap bolt recommended tightening torque:203.4 N·m; Pa:36 kN; Housing:SAF 220; J min.:295.275 mm; Labyrinth ring (db shaft position):LOR 118; da:100 mm; ba:38.894 mm; h:42.069 mm; N1:25.4 mm; Da:180 mm; Ca:55.804 mm; P150°:46.3 kN; L:387.35 mm; H1:114.3 mm; db:114.3 mm; H2:44.45 mm; J max.:333.375 mm; |
| SDE20MG KOYO Linear Bearings | Calculation factor Y2:2.5; Comparative axial load rating CFa:3450 kN; Basic static load rating C0:19300 kN; Fatigue load limit Pu:1400 kN; Mass bearing:370 kg; d1 ≈:568 mm; r1,2 min.:2 mm; D1 ≈:635 mm; Thrust factor K:1.45; Comparative radial load rating CF:1730 kN; Design variant/feature:TQON/GW; d:540 mm; Calculation factor e:0.4; T:400 mm; Basic dynamic load rating C:8150 kN; Calculation factor Y0:1.6; D:690 mm; r3,4 min.:5 mm; Calculation factor Y1:1.7; B:400 mm; |
| LMEFP25L Samick Linear Bearings | Oil:207.560 kN; with cylindrical bore:950 min-1; Pu:1670 kN; Grease:2280 kN; Dynamic (Cr):9 mm; D:360 mm; B:120 mm; d:170 mm; Static (Cor):16.7 mm; rs (min):4 mm; with tapered bore:1 250 min-1; |
| SC12VUU Samick Linear Bearings | Basic dynamic load rating C:530 kN; Fatigue load limit Pu:91.5 kN; d:120 mm; D:180 mm; d2 ≈:140 mm; Operating clearance factor k2:0.103; Da max.:170 mm; Misalignment factor k1:0.109; B:60 mm; D1 ≈:164 mm; s1 max.:12 mm; Mass bearing:5.45 kg; r1,2 min.:2 mm; ra max.:2 mm; Basic static load rating C0:880 kN; Limiting speed:1100 r/min; s2 max.:5.2 mm; |
| LBBR 20 SKF Linear Bearings | Grease Speed Rating Open/Shielded n1:7800 rpm; Basic Static Radial Load Rating Co:22800 N; Basic Dynamic Radial Load Rating C:29700 N; Fillet Radius ra:1.00 mm; D:72.0000 mm; Oil Speed Rating Open/Shielded n2:9500 rpm; B:17.00 mm; d:35.000 mm; Accessories:Snap-Ring; |
| KBS0522 NBS Linear Bearings | Grease Speed Rating Open/Shielded n1:7800 rpm; Basic Static Radial Load Rating Co:22800 N; Basic Dynamic Radial Load Rating C:29700 N; Fillet Radius ra:1.00 mm; D:72.0000 mm; Oil Speed Rating Open/Shielded n2:9500 rpm; B:17.00 mm; d:35.000 mm; Accessories:Snap-Ring; |
| LM10OP CX Linear Bearings | Oil:207.560 kN; with cylindrical bore:950 min-1; Pu:1670 kN; Grease:2280 kN; Dynamic (Cr):9 mm; D:360 mm; B:120 mm; d:170 mm; Static (Cor):16.7 mm; rs (min):4 mm; with tapered bore:1 250 min-1; |
| LME16L Samick Linear Bearings | Initial grease fill:1672.65 g; PG:1/4 NPT; P120°:107 kN; Stabilizing ring:SR-38-32; J min.:549.275 mm; h:61.913 mm; J1:114.3 mm; A2:273.05 mm; S:4.763 mm; Pa:52.5 kN; H:401.637 mm; Labyrinth ring:2 x LOR 155; da:176.213 mm; End plug (suffix Y):EPR 21; R2:42.069 mm; Da:339.999 mm; N1:34.925 mm; P180°:113 kN; P90°:173 kN; Ca:101.803 mm; |
Contact Us
Linear Bearings CATEGORIES
- Original Rexroth AEAA4VSO Series Piston Pump
- Original Rexroth ALA10VO series Piston Pump
- Original Rexroth AZPF series Gear Pump
- Original Rexroth A4VSO Series Piston Pump
- Original Rexroth A4FO series Piston Pump
- Original Rexroth AZPJ series Gear Pump
- Rexroth Axial plunger pump A4VSG Series
- Original Rexroth A4VG series Piston Pump
- Original Rexroth AZPGF series Gear Pump
- Original Rexroth AZPT series Gear Pump
- Rexroth Axial plunger pump A4CSG Series
- Original Rexroth PV7 series Vane Pump
- Original Rexroth AA4VSO Series Piston Pump
- Rexroth Axial plunger pump A2VK Series
- Rexroth Axial plunger pump A7VO Series
- Original Rexroth AEA4VSO series Piston Pump
- Original Rexroth AZPGG series Gear Pump
- Original Rexroth A10VSO Series Piston Pump
- Original Rexroth AZPU series Gear Pump
- Original Rexroth AHAA4VSO Series Piston Pump
- Original Rexroth AHA4VSO series Piston Pump
- Original Rexroth PGF series Gear Pump
- Original Rexroth VPV series Gear Pump
- Original Rexroth PR4 Series Radial plunger pump
- Original Rexroth A8V series Piston Pump
- Original Rexroth A10VO Series Piston Pump
- Original Rexroth AAA4VSO Series Piston Pump
- Original Rexroth PGH series Gear Pump
- Original Rexroth A10VG series Piston Pump
- Original Rexroth AAA10VSO Series Piston Pump
- Original Rexroth A11VO series Piston Pump
- Original Rexroth AA10VSO Series Piston Pump
- Original Rexroth AZMF series Gear Pump
- Original Rexroth AA10VO Series Piston Pump
- Original Rexroth AZPS series Gear Pump
- Original Rexroth A2FO Series Piston Pump
- NACHI PZS Series Hydraulic Piston Pumps
- SUMITOMO QT6253 Series Double Gear Pump
- NACHI PVD Series Hydraulic Piston Pumps
- Komastu Gear Pump
- NACHI PZ Series Hydraulic Piston Pumps
- NACHI PVS Series Hydraulic Piston Pumps
- SUMITOMO QT6252 Series Double Gear Pump
- SUMITOMO QT5242 Series Double Gear Pump
- SUMITOMO QT6143 Series Double Gear Pump
- SUMITOMO Q Series Gear Pump
- SUMITOMO QT5223 Series Double Gear Pump
- Kawasaki K5V Series Pistion Pump
- NACHI PVK Series Hydraulic Piston Pumps
- Kawasaki KR Series Pistion Pump
- SUMITOMO QT6123 Series Double Gear Pump
- SUMITOMO QT5333 Series Double Gear Pump
- SUMITOMO QT6262 Series Double Gear Pump
- SUMITOMO QT5243 Series Double Gear Pump
- SUMITOMO QT5252 Series Double Gear Pump
- SUMITOMO E Series Gear Pump
- SUMITOMO CQ Series Gear Pump
- Kawasaki K3V Series Pistion Pump
- SUMITOMO QT5143 Series Double Gear Pump
- SUMITOMO QT6222 Series Double Gear Pump
- SUMITOMO SD Series Gear Pump
- SUMITOMO QT6153 Series Double Gear Pump
- Angular Contact Ball Bearings
- Needle Roller Bearings
- Spherical Roller Bearings
- Hydraulic Piston Pump/Motor
- Oil Pump
- Hydraulic Gear Pump
- Hydraulic Valve
- Hydraulic Vane Pump
- Linear Bearings
- Cummins Fuel Injector
LMES16OP Samick Linear Bearings
LM10OP CX Linear Bearings
LUCD 12-2LS SKF Linear Bearings
LM35OP CX Linear Bearings
KBS0522 NBS Linear Bearings